User Manual

90
Set trigger menu
Trigger
Set
Descriptions
Trigger
Source
Ch1
Set Ch1 as source trigger
Ch2
set Ch2 as source trigger
EXT
Set external signal as trigger signal source
slope
/
Set trigger on rising edge “/”
\
Set the signal trigger \
Dual edge
Set the signal in the rising and falling edge trigger
Set trigger on Ch2’s rising edge, trigger mode as auto and trigger coupling as DC, refer to
the following steps:
1) press and to select the trigger type as edge
2) press to select source signal as Ch 2
3) press to set slope is “/”(rising edge), press or roll the wheel
to adjust the trigger level.