Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
5-6
Enabling or Disabling LAN Bypass and Link State Failover
Accessing the Preconfiguration Console
Follow the procedures below to access the appliance Preconfiguration console.
To enable or disable LAN bypass and Link state failover:
1. Access the Preconfiguration console as described in Using the Preconfiguration
Console to Set Device Settings on page 4-7.
2. Select option 3, Interface Settings. The following screen appears:
3. Use the TAB key to select the LAN bypass field
4. Press the SPACE bar on your keyboard to choose between disabled and enabled.
The LAN bypass value toggles between disabled and enabled.
5. Use the TAB key to select the Link state failover field
6. Press the SPACE bar on your keyboard to choose between disabled and enabled.
The Link state failover value toggles between disabled and enabled.
7. Use the TAB key to select the Return to Main Menu field and press ENTER. The
Main Menu screen appears.
Interface Settings
Current Interface Setting:
Name MNG EXT INT
=====================================================================
speed&duplex auto auto auto
Link state failover: [disable] Use Space to change the value
LAN bypass: [disable] Use Space to change the value
10H: 10 Mbps x half-duplex 1000F: 1000 Mbps x full-duplex
10F: 10 Mbps x full-duplex auto: automatically select the best
100H: 100 Mbps x half-duplex
100F: 100 Mbps x full-duplex
Return to Main Menu
,<TAB>:Change field. <Space>:Change Value. <ENTER>:Select field.
FIGURE E-2. Preconfiguration console Interface Settings screen