Specifications

Preconfiguring InterScan Gateway Security Appliance
4-19
Configuring InterScan Gateway Security
Appliance
After preconfiguring the appliance, you are ready to configure the device and
commence network protection. Configure the device using the
appliance Web
console.
Trend Micro recommends performing the following tasks after preconfiguring the
appliance
:
• Activate the product
• Configure notification settings including setting the administrator password
• Update scan engine and pattern files
• Change the Web console password
Refer to the following documentation for related instructions:
• InterScan Gateway Security Appliance Online Help – provides instructions on
how to configure
the appliance.
Testing the Appliance Connectivity
Perform either of the following tasks to test whether you have successfully configured
the InterScan Gateway Security Appliance.
To test if the device is configured properly, do one of the following:
1. Ping the device to verify connectivity; you can obtain the IP address by looking
at the LCD panel on the front of the device.
2. Browse the InterScan Gateway Security Appliance Web interface by going to a
PC on the protected network and opening an Internet Explorer browser to
https://{The appliance IP Address}