Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
4-16
To configure the appliance IP network settings through the LCM module:
1. Press Enter. The Main Menu appears.
2. Use the down arrow to select Configure.
3. Press Enter and a prompt displays asking if you want to change settings.
Tip: The LCM module times out in three (3) minutes if there is no activity
initiated using the control panel.
4. To continue, ensure that a asterisk (*) is next to Yes. To abort, move the asterisk
(*) to the No position:
(*) Yes ( ) No
5. Press Enter.
6. If you selected Yes, a prompt appears asking to have the appliance IP address
dynamically assigned. Choose from one of the following options for assigning
the device and IP address:
• To use a dynamic IP address, ensure that a asterisk (*) is next to Yes and
press Enter.
(*) Yes ( ) No
• To manually enter a static IP address, do the following:
a. Ensure that a asterisk (*) is next to No and press Enter.
( ) Yes (*) No
b. Type the new IP address, netmask, gateway address, primary DNS
address, and/or the secondary DNS address.
7. Press Enter to save the settings when prompted.
The appliance immediately applies the new settings.
After completing these tasks, the hostname and IP address will appear in the device
LCD.