Specifications

Preconfiguring InterScan Gateway Security Appliance
4-15
Exiting the Preconfiguration Console
Log off from the preconfiguration console after completing preconfiguration or mod-
ifying settings (for example, device settings) that require logging off for changes to
take effect.
To log off from the preconfiguration console:
1. On the Main Menu of the preconfiguration console, select Log off with saving
or Log off without saving. A confirmation message appears.
2. Select OK to log off.
Note: In order to apply new settings, you must save before logging off.
Configuring InterScan Gateway Security Appliance Using
the LCM Module
With the LCM module, you can configure the appliance’s IP network settings. Use the
LCM module to access all configuration options.
There are five buttons on the LCM module:
• Up arrow – cycles forward through the alphanumeric characters displayed on the
LCD
• Down arrow – cycles backward through the alphanumeric characters displayed
on the LCD
• Left arrow – moves the focus or cursor to the left
• Right arrow – moves the focus or cursor to the right
Tip: Use the Left and Right arrows to read the logs displayed on the LCD.
• Enter – confirms selection or input
Note: The LCD and keypad do not work when the system is powered off (even if the
device is plugged in to an AC power source).