Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
4-14
Tip: Host names may be up to 63 alphanumeric characters (spaces not allowed).
Trend Micro recommends a unique descriptive host name to represent and
identify the InterScan Gateway Security Appliance device.
WARNING! If there is a NAT device in your environment, Trend Micro recommends
assigning a static IP address to InterScan appliance. Because different
port settings are assigned from your NAT, the appliance may not work
properly if dynamic IP addresses are used.
3. After specifying the network settings, select Return to the Main Menu. The
console returns to the Main Menu screen.
4. Select Log off with saving, to save settings and to log off.
Setting the Interface Speed and Duplex Mode
Use the preconfiguration console to configure the interface speed and duplex mode.
To set the interface speed and duplex mode:
1. Log on to the appliance preconfiguration console using the administrator
password.
2. On the Main Menu, select Interface Settings.
3. On the Interface Settings screen, select the port to configure and use the space
bar to navigate a list of options. For example, to configure the interface speed and
duplex mode of the management (MGT) port, use the space bar to navigate
through a list of options.
4. [Optional] LAN bypass - use the space bar to enable or disable LAN bypass.
5. Log off the preconfiguration console for changes to take effect.