Specifications

Preconfiguring InterScan Gateway Security Appliance
4-13
Preconfiguration Console Controls
• To change fields, press the UP ARROW, DOWN ARROW, and TAB keys to
jump from field to field.
• To change field values, press the SPACEBAR to navigate through a list of
predefined values.
• To navigate between screens, press the ENTER key.
Configuring Device Settings
Immediately after logging on to the preconfiguration console for the first time,
change the default password to a secure password. After changing the password, use
the Device Settings menu to configure the
appliance host name.
To configure the InterScan Gateway Security Appliance device IP settings:
1. On the Main Menu of the preconfiguration console, use the UP ARROW or
DOWN ARROW and select Device IP Settings. The Device IP Settings screen
appears.
Note: When you configure the device for the first time, the factory default settings
appear.
2. Use the UP ARROW or DOWN ARROW to navigate the Device IP Settings list.
• Type - Choose whether to use a static or dynamic IP address (default is
dynamic).
If you select static, you will be required to set the netmask address, default
gateway address, and primary DNS address.
Note: You may be required to provide the address for the secondary DNS
server address.
• Host name - Type a host name that properly represents the appliance in the
network and on the Web console.
Trend Micro recommends that each InterScan appliance on your network have a unique
host name.