Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
4-12
Logging On to the Preconfiguration Console
After preparing the terminal application, you are ready to use the preconfiguration
console.
To access the preconfiguration console:
1. Power on the appliance (approximately 1-2 minutes) by completing the following
tasks:
a. Connect the power cord to the DC power receptacle.
b. Connect the power cord to an electrical outlet.
c. Push the power switch to turn on the device.
The Welcome message appears in the LCD module when the system is
successfully powered on.
2. Press Enter when the terminal interface displays InterScan Gateway Security
Appliance preconfiguration, Press <ENTER> to continue...
After connection, the terminal screen appears blank.
3. Type the default administrator password:
Password: admin
Note: Change the default password to a secure password immediately after logging
on for the first time.
Use this logon password for full access to all appliance preconfiguration features.
4. After you log on, the Main Menu appears.
Note: The preconfiguration console has a timeout value of three (3) minutes. If the
console is idle for three minutes, it automatically logs off the account.