Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
4-10
FIGURE 4-3. HyperTerminal COM Properties screen
6. Click OK. The COM Properties screen disappears and the screen is blank.
7. At the blank HyperTerminal screen, type the appliance Preconfiguration console
password, or, if this is the first time you use the device, use the default password
admin and press ENTER. The console accepts the password, displays the Login
screen, and moves the cursor to the Login prompt.
Tip: Trend Micro recommends that you change the default password upon first
use. You can do so through the Preconfiguration console.