Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
3-14
Failover Deployment
If deploying two InterScan appliances, you can deploy them in such a way that if the
connection to one appliance is broken, the second appliance takes over the load of the
first appliance.
The basic steps for setting up a failover deployment are:
1. Deploy two appliances in your network (see Failover Deployment Scenario on
page 3-15
2. Ensure that LAN bypass, an option in the Preconfiguration console, is disabled
(disabled by default)
3. Enable Link state failover, another option in the Preconfiguration console
(disabled by default)
For instructions on how to set these options, see Enabling or Disabling LAN
Bypass and Link State Failover on page 5-6.