Specifications
Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
2-18
Deployment Notes
Consider the following when planning for to deploy the InterScan appliance:
• Configure all network devices to ensure that all traffic to and from the protected
network goes through the appliance.
To protect an organization from network threats, position appliances at key
places on your network. The appliance should be able to scan all network traffic
to prevent, detect, or contain threats.
• The appliance supports the following port speed and duplex mode settings:
The appliance supports Failopen (LAN bypass). If the appliance should lose power or
become disabled for some reason, LAN bypass can be enabled to allow traffic to
continue to pass through the device. LAN bypass is enabled by default. For more
detailed information on configuring LAN bypass, see
Enabling or Disabling LAN
Bypass and Link State Failover on page 5-6.
• 10Mbps x half-duplex
• 10Mbps x full-duplex
• 100Mbps x half-duplex
• 100Mbps x full-duplex
• 1000Mbps x full-duplex