Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
2-12
Figure 2-8. is an image of a slide set that has been lined up with the cage nuts and
partially attached with one of the cage screws.
FIGURE 2-8. Slide set partially attached to the post of 4-post cabinet
Tip: An InterScan Gateway Security Appliance device occupies 1 RU (1.70in or
4.32cm, three rack holes) of vertical space in the rack.
3. Insert a cage screw into the top-most hole of the slide set and tighten.
4. Insert a cage screw into the bottom-most hole of the slide set and tighten.
5. At the back of the cabinet, pull back the slide set until the mounting holes align
with their respective cage nut holes.
Cage nuts
Slide set mounting hole
Cage screw used to attach the slide