Specifications

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Deployment Guide
2-10
There is a lip at one end of the rail. Make sure the end of the rail containing the
lip is towards the front of the device.
FIGURE 2-6. Image of the mounting post and slot
On each side of the device are two metal mounting posts. Make sure that the
keyhole-shaped holes (mounting slots) in the rail match up with the mounting
posts, and then firmly slide the rail until the mounting posts are securely locked
into the mounting slots. See
Figure 2-7. below.
Mounting slot
Mounting post
Lip - front of rail
Rail (front-side view)