Installation guide

Trend Micro™ InterScan™ Web Security Virtual Appliance 6.5 Installation Guide
3-6
Installation Steps for both a VMware ESX Virtual Machine and a Bare Metal
Server
Note: IWSVA does not need a network connection during installation, but it must connect
with the Internet when using the Deployment Wizard after the installation completes.
A page appears displaying the IWSVA Installation Menu. The options on this menu
are as follows:
• Install IWSVA: Select this option to install IWSVA onto the new hardware or
virtual machine.
• System Recovery: Select this option to recover an IWSVA system in the event
that the administrative passwords cannot be recovered.
• Exit Installation: Select this option to exit the installation process and to boot
from the local disk.
2. Select Install IWSVA.
The license acceptance page appears.
3. Click Accept to continue.
A page appears where you choose a keyboard language.
4. Select the keyboard language for the system and then click Next.
5. Select the driver(s) used for installation and then click Next.
The IWSVA installer scans your hardware to determine if the minimum
specifications have been met and then displays the results illustrated as follows. If
the host hardware contains any components that do not meet the minimum
specifications, the installation program highlights the nonconforming components
and the installation stops.
6. Click Next to continue.
A page appears where you specify network devices, hostname, and miscellaneous
settings. If you choose to set the hostname manually, the Miscellaneous Settings will
be available to you.