Installation guide

Creating a New Virtual Machine Under VMware ESX for IWSVA
E-15
Client Device uses the remote workstation's CD/DVD ROM drive to perform the
installation and Host Device uses the VMware Server's CD/DVD ROM drive to
perform the installation. Using one of these two methods saves about 500 MB or
more of disk space on the VMware server.
26. Ensure that the Connect at power on check box for the New CD/DVD is
checked.
Note: When IWSVA is installed on a VMware ESX server and configured in Transparent
Bridge mode, you must enable the virtual switch to accept the Promiscuous mode in
the ESX server. 

When deploying IWSVA in bridge mode, do not connect the two data network
interfaces to the same switch; otherwise, a loop will be created in your network.
F
IGURE E-13. Promiscuous mode in the ESX server
27. Click Finish.
The new IWSVA 6.5 Virtual Machine is now ready and configured to be powered
on and begin the installation process.