User's Manual

Strata Operations Guide
-
10 -
Supported Strata TX System Configuration Options
The following information may be used to identify which Strata TX system options may be used for
specific customer applications.
TCU Supported Signal Options
Hardware Option Signal Input Signal Output Monitor Out Notes
* MPEG/COFDM Only NTSC/PAL ASI Various formats
* MPEG/COFDM Only SDI (525/625) ASI Various formats
* MPEG/COFDM Only NTSC/PAL COFDM - IF COFDM Various formats
* MPEG/COFDM Only SDI (525/625) COFDM - IF COFDM Various formats
* MPEG/COFDM Only ASI COFDM - IF COFDM Various formats
* MPEG/COFDM Only IF IF IF IF Bypass Mode
FMT Only NTSC/PAL IF CV IF CV NTSC/PAL CV IF
FMT Only IF IF IF IF Bypass Mode
* MPEG/COFDM + FMT NTSC/PAL ASI Various formats
* MPEG/COFDM + FMT SDI (525/625) ASI Various formats
* MPEG/COFDM + FMT NTSC/PAL COFDM - IF COFDM Various formats
* MPEG/COFDM + FMT NTSC/PAL IF CV IF CV NTSC/PAL IF
* MPEG/COFDM + FMT SDI (525/625) COFDM - IF COFDM Various formats
* MPEG/COFDM + FMT ASI COFDM - IF ASI or COFDM Various formats
* MPEG/COFDM + FMT IF IF IF IF Bypass Mode
Notes:
* = ASI output possible when TCU used in stand-alone (MPEG only) mode
TXU Supported Signal Options
Hardware Option Signal Input Signal Output Notes
MPEG/COFDM Option NTSC/PAL COFDM - RF Various formats
MPEG/COFDM Option SDI (525/625) COFDM - RF Various formats
MPEG/COFDM Option ASI COFDM - RF Various formats
MPEG/COFDM Option IF RF Up-converted Channelized RF signal
FMT Option NTSC/PAL CV - RF NTSC/PAL CV Channelized RF
FMT Option IF RF Up-converted Channelized RF signal
No options installed IF RF Up-converted Channelized RF signal
Note: TXU supports either MPEG/COFDM option or FMT option, but not both.