User Manual

A
Channels & Frequencies A-1STRATA TX Operator’s Guide/Tech Ref Manual
Channels &
Frequencies
A.1 Appendix Overview
This Appendix presents the channels and frequencies that can
be programmed into your STRATA TX System at the factory.
Here are the topics covered:
A.2 Initial Factory Presets
This section lists the channels and frequencies for each RF band
covered by the STRATA TX System. These frequencies are
Topic Page
Initial Factory Presets A-1
3.4 to 3.8 GHz Channel Plan A-1
4.4 to 5.0 GHz Channel Plan A-2
6.4 to 7.1 GHz Channel Plan A-2
6.9 to 7.5 GHz Channel Plan A-3
7.4 to 8.0 GHz Channel Plan A-3
7.8 to 8.5 GHz Channel Plan A-4
8.2 to 8.9 GHz Channel Plan A-4
10.0 to 10.7 GHz Channel Plan A-5
10.5 to 11.2 GHz Channel Plan A-5
10.8 to 11.5 GHz Channel Plan A-6
12.7 to 13.25 GHz Channel Plan A-6
preset at the factory, but can be modified using the STRATA TX
Configurator software.
Note
These frequency settings should only be changed
by qualified technical personnel.
Contact the Society of Broadcast Engineers (SBE) coordinator
for up-to-date information on local frequency plans for Electronic
News Gathering (ENG) and Remote Pickup (RPU) operations.
A.2.1 3.4 to 3.8 GHz Channel Plan
The channel plan for the 3.4 to 3.8 GHz STRATA TX System is
contained in Tab le A - 1.
Table A-1: 3.4 to 3.8 GHz Channel Plan
Channel
(-) Offset
(MHz)
(0) Center
(MHz)
(+) Offset
(MHz)
1 3406.250 3418.250 3431.250
2 3443.250 3455.250 3467.250
3 3480.250 3492.250 3504.250
4 3506.250 3518.750 3531.250
5 3543.750 3556.250 3568.750
6 3581.250 3593.750 3606.250
7 3610.000 3620.000 3630.000
8 3640.000 3650.000 3660.000
9 3670.000 3680.000 3690.000
10 3700.000 3710.000 3720.000
11 3730.000 3740.000 3750.000