User Manual
Table Of Contents
- About This Manual
- Copyright
- Proprietary Material
- Quality Certification
- Regulatory Status
- Conventions
- Symbols Used
- Warranty Information
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators, and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the STRATA TX Screens
- 3.5 TXU and/or TCU Monitoring Operations
- 3.5.1 Using the Monitor Screens in MPEG Output Mode
- 3.5.2 Using the Monitor Screens in Ext IF Input Mode
- 3.5.3 Using the Monitor Screens in COFDM - IF Mode
- 3.5.4 Using the Monitor Screens in COFDM ASI In Mode
- 3.5.5 Using the Monitor Screens in Analog - IF Mode
- 3.5.6 Using the Monitor Screens in DVB-S Mode
- 3.6 TXU and/or TCU Control Operations
- 3.7 Front Panel vs. STRATA TX Configurator Settings
- Table 3-1: Front Panel vs. Configurator Settings
- Troubleshooting
- Channels & Frequencies
- A.1 Appendix Overview
- A.2 Initial Factory Presets
- A.2.1 3.4 to 3.8 GHz Channel Plan
- A.2.2 4.4 to 5.0 GHz Channel Plan
- A.2.3 6.4 to 7.1 GHz Channel Plan
- A.2.4 6.9 to 7.5 GHz Channel Plan
- A.2.5 7.4 to 8.0 GHz Channel Plan
- A.2.6 7.8 to 8.5 GHz Channel Plan
- A.2.7 8.2 to 8.9 GHz Channel Plan
- A.2.8 10.0 to 10.7 GHz Channel Plan
- A.2.9 10.5 to 11.2 GHz Channel Plan
- A.2.10 10.8 to 11.5 GHz Channel Plan
- A.2.11 12.7 to 13.25 GHz Channel Plan
- Glossary
- Specifications
Troubleshooting 4-9STRATA TX Operator’s Guide/Tech Ref Manual
Table 4-6: Video Problems
Problem Possible Cause Suggested Operator Action Suggested Technical Staff Action
Video Problems
No video. Problem with video source
or cabling
• Check video source and
cabling.
• Contact technical staff.
• Check video source and cabling.
• Call MRC Technical Support.
Transmitter and Receiver
compatibility problems
• Verify Transmitter and
Receiver are both operating in
the same digital or analog
modes.
• Verify Transmitter and
Receiver are both operating on
the same frequency. If
frequency offsets are used,
verify offsets are identical
between Transmitter and
Receiver.
• Contact technical staff.
• Call MRC Technical Support
Video source configuration
problem
• Verify TXU/TCU front panel
settings match video source
inputs.
• Contact technical staff.
• Verify video inputs match STRATA TX
Configuration Utility settings.
• Call MRC Technical Support.