User Manual
Table Of Contents
- About This Manual
- Copyright
- Proprietary Material
- Quality Certification
- Regulatory Status
- Conventions
- Symbols Used
- Warranty Information
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators, and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the STRATA TX Screens
- 3.5 TXU and/or TCU Monitoring Operations
- 3.5.1 Using the Monitor Screens in MPEG Output Mode
- 3.5.2 Using the Monitor Screens in Ext IF Input Mode
- 3.5.3 Using the Monitor Screens in COFDM - IF Mode
- 3.5.4 Using the Monitor Screens in COFDM ASI In Mode
- 3.5.5 Using the Monitor Screens in Analog - IF Mode
- 3.5.6 Using the Monitor Screens in DVB-S Mode
- 3.6 TXU and/or TCU Control Operations
- 3.7 Front Panel vs. STRATA TX Configurator Settings
- Table 3-1: Front Panel vs. Configurator Settings
- Troubleshooting
- Channels & Frequencies
- A.1 Appendix Overview
- A.2 Initial Factory Presets
- A.2.1 3.4 to 3.8 GHz Channel Plan
- A.2.2 4.4 to 5.0 GHz Channel Plan
- A.2.3 6.4 to 7.1 GHz Channel Plan
- A.2.4 6.9 to 7.5 GHz Channel Plan
- A.2.5 7.4 to 8.0 GHz Channel Plan
- A.2.6 7.8 to 8.5 GHz Channel Plan
- A.2.7 8.2 to 8.9 GHz Channel Plan
- A.2.8 10.0 to 10.7 GHz Channel Plan
- A.2.9 10.5 to 11.2 GHz Channel Plan
- A.2.10 10.8 to 11.5 GHz Channel Plan
- A.2.11 12.7 to 13.25 GHz Channel Plan
- Glossary
- Specifications
Routine Operation 3-37STRATA TX Operator’s Guide/Tech Ref Manual
Audio Channel 1
thru 4
Frequency
• 4830 kHz ✔
• 5200 kHz
✔
• 5800 kHz
✔
• 6200 kHz
✔
• 6800 kHz
✔
• 7020 kHz
✔
• 7500 kHz
✔
• 8065 kHz
✔
• 8300 kHz
✔
• 8590 kHz
✔
Audio Channel
Frequency
Enabled
• Selected
✔
• Not selected
✔
Pre-emphasis • Selected
✔
• Not selected
✔
DVB-Satellite
Modulation • QSPK
✔
• 16 QAM
✔
• 8 PSK
✔
Symbol Rate • (Variable)
✔
Table 3-1: Front Panel vs. Configurator Settings (Continued)
Parameter
Available
Settings
Set
Using
Control
Switch
Set Using TX
Configurator
Forward Error
Correction
•1/2 ✔
•2/3
✔
•3/4
✔
•5/6
✔
•7/8
✔
Roll Off Factor • 0.25
✔
•0.35
✔
IF Frequency • (Variable)
✔
Table 3-1: Front Panel vs. Configurator Settings (Continued)
Parameter
Available
Settings
Set
Using
Control
Switch
Set Using TX
Configurator