User Manual

Product Description 2-9STRATA TX Operator’s Guide/Tech Ref Manual
Both Remote Control Panel models provide simplified transmit
operations by allowing the operator or pilot to select either
analog or digital pre-configured Presets, Channels, and Offsets,
depending upon the required operating mode.
Standard Remote Control Panel The standard STRATA
Remote Control Panel (See Figure 2-9) provides instrument
panel remote control of the STRATA TX System for mobile
operations and features 9 selectable Presets.
For additional information, refer to the STRATA Remote Control
Panel Operator’s Guide (part no. 400489).
Figure 2-9: Standard Remote Control Panel
Aircraft Remote Control Panel The STRATA Aircraft Remote
Control Panel (See Figure 2-10) is a simplified version of the
standard STRATA Remote Control Panel. This panel provides
instrument panel remote control of the STRATA TX System for
airborne operations. This model features only two Presets for
ease of operation.
The unit is designed to fit a standard aircraft instrument panel
and provides user-friendly controls, combined with well placed
and easy to read LED displays and color indicators.
For additional information, refer to the STRATA Aircraft Remote
Control Panel Operator’s Guide (part no. 400490).
Figure 2-10: Aircraft Remote Control Panel
2.4 TXU and TCU Configurations
TXU Different configurations of the TXU are available,
depending upon if your TX System contains a standalone TXU or
if your TX System contains both a TXU and TCU. The different
configurations are described below.
If your TXU is equipped with either an analog (FMT) module or a
digital (MPEG/COFDM) module and was ordered to operate in a
standalone mode without a TCU, the front panel will contain an
AUDIO connector. See Figure 2-11 on page 2-10.