User Manual
Table Of Contents
- About This Manual
- Copyright
- Proprietary Material
- Quality Certification
- Regulatory Status
- Conventions
- Symbols Used
- Warranty Information
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators, and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the STRATA TX Screens
- 3.5 TXU and/or TCU Monitoring Operations
- 3.5.1 Using the Monitor Screens in MPEG Output Mode
- 3.5.2 Using the Monitor Screens in Ext IF Input Mode
- 3.5.3 Using the Monitor Screens in COFDM - IF Mode
- 3.5.4 Using the Monitor Screens in COFDM ASI In Mode
- 3.5.5 Using the Monitor Screens in Analog - IF Mode
- 3.5.6 Using the Monitor Screens in DVB-S Mode
- 3.6 TXU and/or TCU Control Operations
- 3.7 Front Panel vs. STRATA TX Configurator Settings
- Table 3-1: Front Panel vs. Configurator Settings
- Troubleshooting
- Channels & Frequencies
- A.1 Appendix Overview
- A.2 Initial Factory Presets
- A.2.1 3.4 to 3.8 GHz Channel Plan
- A.2.2 4.4 to 5.0 GHz Channel Plan
- A.2.3 6.4 to 7.1 GHz Channel Plan
- A.2.4 6.9 to 7.5 GHz Channel Plan
- A.2.5 7.4 to 8.0 GHz Channel Plan
- A.2.6 7.8 to 8.5 GHz Channel Plan
- A.2.7 8.2 to 8.9 GHz Channel Plan
- A.2.8 10.0 to 10.7 GHz Channel Plan
- A.2.9 10.5 to 11.2 GHz Channel Plan
- A.2.10 10.8 to 11.5 GHz Channel Plan
- A.2.11 12.7 to 13.25 GHz Channel Plan
- Glossary
- Specifications
Product Description 2-6STRATA TX Operator’s Guide/Tech Ref Manual
Interfacing a PC to either the TXU or TCU in a connected system
gives you complete control of both units. You can read the
current settings, program new settings, or return the units to their
factory default settings. The STRATA TX Configurator software
automatically detects what hardware is installed in the system
and assigns the appropriate configuration to the correct
hardware, regardless of which unit holds the hardware being
configured.
Figure 2-5: STRATA TX System Options
TXU
TXU
TXU
TXU
TXU
TCU
TCU
RXU
70 MHz IF Output Only
NTSC or PAL Analog Video
with 4 Audio Channels Available
SDI, ASI, NTSC or PAL
& Digitial/Analog Audio
1.9 to 2.5 GHz
or 2.3 to 2.7 GHz
RF Output
SDI, ASI, NTSC or PAL
& Digitial/Analog Audio
Digital Video + Audio
Analog Video + Audio
ASI Monitor
ASI Monitor
RF/IF Only
RF/IF Only
RF/IF Only
COFDM / MPEG
COFDM / MPEG
& FMT
FMT Option
COFDM / MPEG
Option
TXU
TCU
RF/IF Only
HPU
HPU
HPU
HPU
HPU
RXU
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
(OPTIONAL)
HPU
(OPTIONAL)
FMT Only