User Manual

Routine Operation 3-27STRATA TX Operator’s Guide/Tech Ref Manual
3.6 TXU and/or TCU Control
Operations
This section describes how to configure your STRATA TX
System using the front panel Control Switch. Turning the front
panel Control Switch counterclockwise on either the TXU or TCU
controls transmitter functions including changing Presets,
changing RF channel assignments, setting RF attenuation
levels, and activation of DC power from a TCU to a separately
located TXU, or from a TXU to a separately located TCU.
Settings may be changed on a standalone TCU, a standalone
TXU, or a TXU and TCU TX System.
For a summary of settings that can be changed using the front
panel Control Switch and which are made using the STRATA TX
Configurator software, see “Front Panel vs. STRATA TX
Configurator Settings” on page 3-34.
Here are the tasks described:
Refer to Figure 3-24 on page 3-28 for the Control Menu Map.
Topic Page
Changing a Preset 3-29
Setting a Channel 3-30
Setting Power Output 3-31
Controlling TCU to TXU
DC Power on Coax
3-32