User Manual
Table Of Contents
- Strata Transmitter
- Operations Guide
- Theory of Operation
- Command and Control Power Supply
- MPEG/COFDM Encoder/Modulator
- FMT
- TCU
- TXU
- HPU
- TCU/TXU Front Panel Control Settings
- Notes:
- In the case of digital audio connections, note that the GND (ground) connection is common to two audio circuits as opposed to the connections used for standard analog audio circuits. In the case of digital audio circuits then, a single XLR connector sup
- Strata TX Digital and Analog Audio Options
- Strata Power Cables
- MRC 907386-1 COFDM/MPEG Encoder PWB Layout
Strata Operations Guide
-
24 -
Bridging Connectors
Channel 1, 2
Audio Inputs
COFDM/MPEG Encoder
FMT
Chan 1
Audio
Chan 2
Audio
Connecting Analog Audio Input Signals to both FMT and MPEG Encoder Modules
Notes:
1. One or both analog audio input signals may be connected to an FMT module, an MPEG encoder
module, or both.
2. When connecting analog audio input signals to both FMT and MPEG encoder modules, the FMT
audio input circuit is optioned to “bridge” one or both audio channels to accommodate bridged
connections to a co-located MPEG encoder module.
3. Analog audio input signals may be split between FMT and MPEG encoder modules by directly
connecting one channel to each module.