User Manual

3-6 Operating the PTX-PRO PTX-PRO User and Technical Manual
3.5.5 Modifying Preset Parameters
To modify a preset, select a preset from the drop down box in the Preset Operations area on the
Main tab of the MRC Radio Configurator and click Load Preset. The PTX-PRO loads the
current values of that preset. Click on the tabs to modify various categories of parameters. Each
tab is described in the following sections.
Radio Mode Tab
You can set the radio mode parameters for each preset.
Load Page from Radio—To load parameters for this page from the PTX-PRO, click on this
button.
Program Page to Radio—To apply parameter modifications to the PTX-PRO, click on this
button.
Field Options
Preset Name Displays the name of the preset.
Operation Mode Select CODFM, ASI IN, Ext. IF In, Analog IF out, or LMS-T.
Color Bars Where applicable, select ON or OFF. LMS-T also has Auto and Standby options.
IF/CW Tone Where applicable, select ON or OFF.
Remember Last
PA State
Check this box to load these values the next time you use the configurator.