User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the Display Screens
- 3.5 PTX-PRO Monitoring Operations
- 3.6 PTX-PRO Control Operations
- 3.7 Front Panel vs. Configurator Settings
- Troubleshooting
- Advanced Operation
- 5.1 Chapter Overview
- 5.2 Before You Begin
- 5.3 Create or Update a Configuration
- 5.3.1 Using the Configurator Software
- 5.3.2 Determine Licensed Options
- 5.3.3 Create New Configuration On-Line
- 5.3.4 Load and Modify Configuration Settings On- Line
- Figure 5-7: Load and Modify Configuration Settings On-Line - Sheet 1 of 5
- Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
- Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
- Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
- Figure 5-11: Load and Modify Configuration Settings On-Line - Sheet 5 of 5
- 5.3.5 Load Configuration File into Radio On-Line
- 5.3.6 Change Preset Names in On-Line Mode
- 5.3.7 Create Channel Plan Offline
- 5.3.8 Modify Channel Plan in Offline Mode
- 5.3.9 Load and Modify a Channel Plan On-Line
- 5.3.10 Load Channel Plan File into Radio On-Line
- 5.3.11 Add Licensed Option
- Installation
- 6.1 Chapter Overview
- 6.2 Unpacking
- 6.3 Initial Inspection
- 6.4 Damage in Shipment
- 6.5 Mounting and Cabling
- 6.6 Power Connections
- 6.7 Grounding
- 6.8 Audio Connections
- 6.9 Signal Connections
- 6.10 Data Connections
- 6.11 Powering Up
- 6.12 Configurator Software Installation
- 6.13 Product Modifications
- Replacement Parts
- Theory of Operation
- Index
Routine Operation 3-14PTX-PRO User and Technical Manual
3.7 Front Panel vs. Configurator
Settings
The design of the PTX-PRO and the Configurator software
makes commonly available settings accessible from the PTX-
PRO front panel switches and alphanumeric display and more
advanced settings accessible through the Configurator software.
A summary of settings that can be controlled by each method is
shown in Table 3-1.
Table 3-1: Front Panel vs. Configuration Setting
Parameter
Available
Settings
Set
Using
Control
Switches
Set Using
Configurator
Presets
Preset in use 1, 2,... 9
✔ ✔
Preset text Any 12
alphanumeric
characters
✔
Operation
Mode
(Special
license
required for
LMS-T)
•COFDM
✔
• ASI In
✔
• Ext. IF In
✔
•LMS-T
✔
Color Bars • ON
✔ ✔
•OFF
✔ ✔
•Auto
✔ ✔
• Standby
✔ ✔
IF/CW Tone • ON ✔
•OFF
✔
Variable
Voltage
Attenuation
(TX VVA)
(Back Off)
• Variable (0 to
-19 dB in 1
dB steps)
✔ ✔
Channels
Channel &
Offset in use
• 1 thru 22
✔
•+, 0, -
✔
Channel &
Offset
Frequencies
13 GHz band
✔
MPEG
Service
Name
• Any eight
alphanumeric
characters
✔
Network
Name
• Any eight
alphanumeric
characters
✔
Video Input
Mode
•SD
✔ ✔
• HD (Special
license
required)
✔ ✔
Table 3-1: Front Panel vs. Configuration Setting (Continued)
Parameter
Available
Settings
Set
Using
Control
Switches
Set Using
Configurator