User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the Display Screens
- 3.5 PTX-PRO Monitoring Operations
- 3.6 PTX-PRO Control Operations
- 3.7 Front Panel vs. Configurator Settings
- Troubleshooting
- Advanced Operation
- 5.1 Chapter Overview
- 5.2 Before You Begin
- 5.3 Create or Update a Configuration
- 5.3.1 Using the Configurator Software
- 5.3.2 Determine Licensed Options
- 5.3.3 Create New Configuration On-Line
- 5.3.4 Load and Modify Configuration Settings On- Line
- Figure 5-7: Load and Modify Configuration Settings On-Line - Sheet 1 of 5
- Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
- Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
- Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
- Figure 5-11: Load and Modify Configuration Settings On-Line - Sheet 5 of 5
- 5.3.5 Load Configuration File into Radio On-Line
- 5.3.6 Change Preset Names in On-Line Mode
- 5.3.7 Create Channel Plan Offline
- 5.3.8 Modify Channel Plan in Offline Mode
- 5.3.9 Load and Modify a Channel Plan On-Line
- 5.3.10 Load Channel Plan File into Radio On-Line
- 5.3.11 Add Licensed Option
- Installation
- 6.1 Chapter Overview
- 6.2 Unpacking
- 6.3 Initial Inspection
- 6.4 Damage in Shipment
- 6.5 Mounting and Cabling
- 6.6 Power Connections
- 6.7 Grounding
- 6.8 Audio Connections
- 6.9 Signal Connections
- 6.10 Data Connections
- 6.11 Powering Up
- 6.12 Configurator Software Installation
- 6.13 Product Modifications
- Replacement Parts
- Theory of Operation
- Index
Routine Operation 3-13PTX-PRO User and Technical Manual
Figure 3-9: Control Menu Map
Chng Preset
Set TX Attn
Attn:
Preset
Main
Screen
NOTE
All Control Screens
revert to the Main
Screen after 7 seconds
of inactivity.
Control Menu Access:
TURN Control Switch
ccw and PRESS to
activate.
Displays power level
and Channel number.
Select Preset 1
thru Preset 9
Select 0 to -19
dB Attenuation
1) PRESS to activate
2) TURN to change
3) PRESS to select
1) PRESS to activate
2) TURN to change
3) PRESS to select
Returns to Main
Screen after
PRESS to select
SD Mode only
Chng SD VI
Select SD or HD
Select 525 Line SDI, NTSC,
or NTSC NoPdstl (NTSC) or
625 Line SDI, PAL In, PAL M In,
or PAL N In (PAL)
Chng HD VI
Select 1080i30,
1080i29, 1080i25,
720p60, 720p59, or
720p50
(SD Option) (HD Option)
1) PRESS to activate
2) TURN to change
3) PRESS to select
Chng Clr Bar
Select Auto Gen,
Auto Standby, ON,
or OFF
1) PRESS to activate
2) TURN to change
3) PRESS to select
1) PRESS to activate
2) TURN to change
3) PRESS to select
1) PRESS to activate
2) TURN to change
3) PRESS to select
NOTE
The HD option may only be selected if
your PTX-PRO contains the licensed,
factory-enabled HD option. If the
licensed HD option is not present in
your radio, SD Mode Only will be
displayed in lieu of Chng VI Mode
and the video input mode cannot be
changed.
NOTE
The Chng VI Mode, Chng
SD/HD VI, and Chng Clr
Bar Control Screens are
present only if the Preset
operating mode is COFDM
or LMS-T.