User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the Display Screens
- 3.5 PTX-PRO Monitoring Operations
- 3.6 PTX-PRO Control Operations
- 3.7 Front Panel vs. Configurator Settings
- Troubleshooting
- Advanced Operation
- 5.1 Chapter Overview
- 5.2 Before You Begin
- 5.3 Create or Update a Configuration
- 5.3.1 Using the Configurator Software
- 5.3.2 Determine Licensed Options
- 5.3.3 Create New Configuration On-Line
- 5.3.4 Load and Modify Configuration Settings On- Line
- Figure 5-7: Load and Modify Configuration Settings On-Line - Sheet 1 of 5
- Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
- Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
- Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
- Figure 5-11: Load and Modify Configuration Settings On-Line - Sheet 5 of 5
- 5.3.5 Load Configuration File into Radio On-Line
- 5.3.6 Change Preset Names in On-Line Mode
- 5.3.7 Create Channel Plan Offline
- 5.3.8 Modify Channel Plan in Offline Mode
- 5.3.9 Load and Modify a Channel Plan On-Line
- 5.3.10 Load Channel Plan File into Radio On-Line
- 5.3.11 Add Licensed Option
- Installation
- 6.1 Chapter Overview
- 6.2 Unpacking
- 6.3 Initial Inspection
- 6.4 Damage in Shipment
- 6.5 Mounting and Cabling
- 6.6 Power Connections
- 6.7 Grounding
- 6.8 Audio Connections
- 6.9 Signal Connections
- 6.10 Data Connections
- 6.11 Powering Up
- 6.12 Configurator Software Installation
- 6.13 Product Modifications
- Replacement Parts
- Theory of Operation
- Index
Product Description 2-3PTX-PRO User and Technical Manual
2.2.4 System Integration
System Operation Once the PTX-PRO is connected and
powered up, system settings can be selected or modified from
the front panel of the PTX-PRO.
System Configurations The PTX-PRO offers two levels of
system configurations designed to match the needs of different
personnel.
For the field operator, the PTX-PRO has up to nine Presets that
can be selected from the front panel. Each Preset controls key
parameters such as modulation, frequency, and audio and video
settings. Additional settings that may be controlled from the front
panel include channel and offset.
For the advanced operator and technical staff, the Configurator
software allows complete control of parameters in the PTX-PRO.
The Configurator software runs on a Microsoft Windows-based
PC and connects to the PTX-PRO via an RS-232 serial interface
cable.
Interfacing a PC to the PTX-PRO provides complete control of
PTX-PRO Presets. You can read the current settings, program
new settings, or return the units to their factory default settings.
The Configurator software automatically detects the hardware
and licensed options installed in PTX-PRO and assigns the
appropriate configurations to the correct hardware.