User Manual Part 2

Advanced Operations 5-64MTX5000 User and Technical Manual
Figure 5-155: Video In Screen 1 - Typical
Note
In the following step, select an Input option
applicable to the licensed options contained in your
MTX5000 IDU only. Selection of an option that is
not licensed in your radio will cause the IDU to
operate in the NTSC default mode.
24. Use the Input pull-down menu to select the video
input option required.
25. Select the Video In2 option button and observe the
Video In screen 2 is displayed. See Figure 5-156.
Video In
Back
Input
NTSC
Video In2
Figure 5-156: Video In Screen 2 - Typical
26. Select the Noise Reduction option button for On or
Off, as required.
27. Select the SDI Auto Line option button for On or Off,
as required.
28. Select the HD Test Pattern option button for On or
Off, as required.
29. Select the Back option button and observe the Video
In screen is displayed.
30. Select the Back option button and observe the MPEG
screen is displayed. See Figure 5-157 on page 5-65.
Video In
Back
Noise Reduction
SDI Auto Line
Off
Off HD Test Pattern Off
Main