User Manual Part 2

Advanced Operations 5-50MTX5000 User and Technical Manual
16. Use the DVBS Roll Off pull-down menu to select
20%, 25%, or 35%, as required.
17. Select the Symbol Rate option button and observe
the numeric keypad is displayed.
See Figure 5-118.
Figure 5-118: Numeric Keypad
18. Enter the symbol rate required, select the ENT key,
and observe the DVBS screen is displayed.
19. Select the Back option button and observe the
Operation Mode screen is displayed.
20. Select the MPEG option button and observe the
MPEG screen is displayed. See Figure 5-119.
1 2 3
ESC
0
4
7
5 6
8 9
DEL
0
ESC
ENT
Figure 5-119: MPEG Screen - Typical
21. Select the Video In option button and observe the
Video In screen is displayed. See Figure 5-120.
Figure 5-120: Video In Screen 1 - Typical
Note
In the following step, select an Input option
applicable to the licensed options contained in your
MTX5000 IDU only. Selection of an option that is
not licensed in your radio will cause the IDU to
operate in the NTSC default mode.
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
Video In
Back
Input
NTSC
Video In2