User Manual Part 2

Analog Color Bar Generator B-11MTX5000 User and Technical Manual
Figure B-15: Control Line Display
2 1 3 3 4 7 0
Control Line
Control Line
(7 Characters
Maximum)
Not Editable
Inverse Video
Highlight
2
Character Fields
Color settings (fields 6 and 7)
1
7
0
37
Table B-1: Control Line Parameters
Character
Field
Function
1
2
When CBG is set to A GEN or A Stby, sets the
delay before the CBG will generate bars/tones
(Auto Generated) or places the MTX5000 IDU into
standby (Auto Standby). Delays can be set from 1
to 32 seconds.
See Table B-5 on page B-18 for
delay values.
3 Sets whether the CBG will generate bars, tones, or
both.
0 = no tones, no bars
1 = tones, no bars
2 = no tones, bars
3 = tones and bars
4 Sets the position of Text Line A on the screen.
Each increment in value moves the text line down
a small amount.
0 = top of screen
7 = bottom of screen
NOTE - If the position values for Text Line A and
Text Line B are the same, Line A and Line B are in
the same location. In this case only Line A will be
visible.