User Manual Part 2

Analog Color Bar Generator B-8MTX5000 User and Technical Manual
Figure B-8: Radio Screen
16. Select the Color Bars option button and observe the
Color Bars screen is displayed. See Figure B-9.
Figure B-9: Color Bars Screen
17. Select the On option button and observe the external
monitor display.
- The video display should now have color bars similar
to Figure B-10. The text lines will contain different
characters than those shown, and may be in different
positions on the screen.
Radio
Back
Network Config Level Adjust Color Bars
Calibration
Time & Date
Change Pwd
System Info
License Key
Diagnostics
NextMain
Color Bars
A GenOnOff A Stby
Back
Main
- The Color Bar Generator default screen shown in
Figure B-10 will be displayed when the Color Bar
Generator is active (On).
Figure B-10: Color Bar Generator Default Screen
B.3.4 Configure Text Line A
The procedure required to configure Text Line A of the color bar
generator display is contained in the following steps.
1. Verify the “Preliminary Setup Procedure” on page B-4
has been performed.
2. Verify the Color Bar Generator default screen is
displayed. See Figure B-11 on page B-9.
Text Line A
(16 Characters
Maximum)
Text Line B
(16 Characters
Maximum)
MRC - BOSTON
REMOTE 1