User Manual Part 2

Advanced Operations 5-116MTX5000 User and Technical Manual
Figure 5-238: Firmware Update Screen - Typical
CAUTION
When the Update option button is selected
in the following step, a progress bar will be
displayed during the update process.
Do not power the MTX5000 down for any
reason while the progress bar is displayed,
as the firmware upgrade will be corrupted.
CAUTION
To avoid corruption of the firmware update,
do not remove the USB flash drive until the
firmware update process is complete.
Notes
If the Current Version and New Version are
different, go to step 7.
If the Current Version and New Version are
identical, go to step 10.
Firmware Update
Update Cancel
Current Version
New Version V.0.4.Y
V.0.3.X
7. Select the Update option button and observe the
Firmware Update screen is displayed and a progress
bar is displayed during the update process.
See
Figure 5-239.
Figure 5-239: Firmware Update Screen - Typical
8. When the firmware update is complete, the IDU will re-
boot, the Main screen will be displayed, and the
Firmware Update screen will be displayed after a
short delay.
Note
In the following step, if the versions shown in the
Firmware Update screen Current Version and
the New Version text boxes are identical, the
firmware update was successful.
9. Observe the Current Version and New Version text
boxes indicate the same version. See Figure 5-240 on
page 5-117.
60 %
Firmware Update in Progress
DO NOT POWER OFF RADIO UNTIL UPDATE COMPLETED!
Please Wait
Firmware Update