User Manual Part 2

Advanced Operations 5-111MTX5000 User and Technical Manual
7. Select the Network Config option button and observe
the Network screen is displayed. See Figure 5-229.
Figure 5-229: Network Config Screen
8. Select the Radio Network option button and observe
the Radio Network screen is displayed. See
Figure 5-230.
Figure 5-230: Radio Network Screen - Typical
Network Config
Radio Network
Back
File Network
Main
Trap Config
Radio Network IP Address
Back
10.4.3.213
Subnet Mask
Gateway
DNS Server
255.255.0.0
10.4.1.1
10.4.1.21
Main
CAUTION
In the following steps, the IP Address,
Subnet Mask, Gateway, and DNS Server
addresses must all be entered correctly.
If the addresses don’t match the
configuration of the network to which the
MTX5000 IDU is connected, the MTX5000
IDU will not be detected and cannot be used
from a remote location.
9. Select the IP Address option button and observe the
numeric keypad is displayed. See Figure 5-231.
Figure 5-231: Numeric Keypad
10. Enter the IP address, select the ENT key, and observe
the Radio Network screen is displayed.
11. Select the Subnet Mask option button and observe
the numeric keypad is displayed.
12. Enter the Subnet Mask address, select the ENT key,
and observe the Radio Network screen is displayed.
13. Select the Gateway option button and observe the
numeric keypad is displayed.
1 2 3
ESC
0
4
7
5 6
8 9
CLR
0
ESC
ENT