User Manual Part 2

Advanced Operations 5-110MTX5000 User and Technical Manual
CAUTION
Do not attempt to perform this procedure
while the MTX5000 system is actively
transmitting.
Attempts to perform this procedure when
the system is transmitting will interrupt
broadcast operations.
Note
In the following steps, option buttons may be
selected using either the touch screen or the
function keys and the SEL key.
1. Verify the MTX5000 IDU is powered up. See
”Powering the MTX5000 System” on page 3-7.
2. Observe the Main screen is displayed. See Figure 5-
226.
Figure 5-226: Main Screen - Typical
3. Select the Main screen PA operation button for PA
Off, as required.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU1
No RF
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA Off
SUM
ODU
IDU
RF
L/R
L
L
PA
Operation
Button
4. Select the L/R option button for L (local mode), as
required.
5. Select the Setup option button and observe the Setup
screen is displayed.
See Figure 5-227.
Figure 5-227: Setup Screen
6. Select the Radio option button and observe the Radio
screen is displayed. See Figure 5-228.
Figure 5-228: Radio Screen
Setup
User
Main
Radio
Radio
Back
Network Config Level Adjust Color Bars
Calibration
Time & Date
Change Pwd
System Info
License Key
Diagnostics
Next
Main