User Manual Part 2

Advanced Operations 5-108MTX5000 User and Technical Manual
8. Connect a USB memory device to a USB-A to USB-B
adapter and connect the adapter to the IDU front panel
USB 2.0 connector.
See Figure 5-222.
Figure 5-222: IDU Front Panel USB Connector
Notes
Ensure your memory device contains the custom
Preset setting configuration file required.
The Load Presets from File option button will not
be active in the following step if there is no Preset
setting configuration file currently contained on the
USB memory device.
9. After a short delay, observe the Load Presets from
File option button is active (not greyed-out). See
Figure 5-223.
1
4
GHI
7 PQRS
*
Shift
2 ABC
5 JKL
8 TUV
0
3
DEF
6 MNO
9 WXYZ
SEL
#Space
MTX5000
USB 2.0
Connector
Radio - 2
Back
Presets Option
Load Presets
from File
Remote Ctrl
Option
Save Presets
to File
PA St ate
Option
Restore Presets
to Defaults
Main
Figure 5-223: Preset File Screen - Typical
10. Select the Load Presets from File option button and
observe the Are you sure? screen is displayed. See
Figure 5-224.
Figure 5-224: Verification Screen
11. Select the Yes option button and observe the Please
Wait! message box is displayed. See Figure 5-225 on
page 5-109.
Radio - 2
Back
Presets Option
Load Presets
from File
Remote Ctrl
Option
Save Presets
to File
PA State
Option
Restore Presets
to Defaults
Main
No
Are you sure?
Yes