User Manual Part 2

Advanced Operations 5-96MTX5000 User and Technical Manual
Note
If you used a factory Default Preset or a custom
User Preset as a “make-from” and you want to add
the new Preset to the list of User Presets
contained in your MTX5000 IDU, you must know
the highest user Preset number contained in your
IDU. To add the new Preset to the list of User
Presets, go to step 69.
If you used a custom User Preset as a “make-
from” and you want to use it to replace (overwrite)
an existing custom User Preset, go to step 71.
69. Select the Preset Number text box and enter any
Preset number that is higher than the current highest
Preset in your MTX5000 IDU.
70. Select the Submit option button and observe that the
Preset Number automatically displays the next higher
Preset number available in the Preset User list. Go to
step 72.
71. Select the Preset Number text box, enter the Preset
number that you wish to overwrite, and select the
Submit option button.
72. Observe the new Preset configuration has been
loaded into the MTX5000 IDU and the new Preset
name and Preset number are displayed on the Main
page.
5.5.6 Create or Update Custom Digital IP Preset
Configuration in Remote Mode
The procedure required to create a new custom digital IP Preset
configuration or to update an existing Preset configuration in the
Remote mode is contained in the following steps.
When preparing a new digital IP Preset, you must first select an
existing digital IP Preset from either the digital IP factory default
Preset or from your own custom digital IP Presets. The selected
Preset will be used as a “make-from” to prepare the new digital
IP Preset configuration.
Please note that while factory default digital IP Presets may be
used to prepare a new Preset configuration, these factory
default Presets cannot be changed or deleted. They can only
be used as “make-froms”.
When the new configuration is prepared using the factory default
Preset, it cannot be saved with the factory Preset number or
Preset name. A new Preset number and Preset name must be
assigned to the new Preset.
When using a custom Preset as a “make-from”, the new Preset
should be saved with a new Preset number.
If you select an existing Preset number when saving the new
Preset, the original custom Preset will be overwritten and cannot
be recovered. The only way to restore a Preset that has been
overwritten is to re-enter the custom Preset data from scratch.
If you are updating configuration settings on an existing custom
Preset, when you save the configuration settings, the Preset
number will automatically be increased to the next available
Preset number. You must enter and save the configuration
settings using the original Preset number.
Note
In the following steps, the color LCD display option
buttons and pull-down menu options may be
selected using either the touch screen or the
function keys and the SEL key.
1. Verify the MTX5000 IDU is powered up. See
”Powering the MTX5000 System” on page 3-7.