User Manual Part 2

Advanced Operations 5-82MTX5000 User and Technical Manual
64. Select the Preset tab and observe the Preset page is
displayed.
Notes
In the following steps, if a factory default digital
COFDM Preset was used as a “make-from” to
prepare this custom Preset, the Preset Text text
box and the Preset Number text box must be
changed. You cannot change or overwrite any
factory default Presets!
If a custom digital COFDM Preset was used as a
“make-from” to prepare this custom Preset, a brief
description of the custom Preset should be entered
in the Preset Text text box for easy identification
purposes. The Preset number must be changed
only if you do not wish to overwrite the custom
Preset.
65. Select the Preset Text text box and enter a unique
digital COFDM Preset description.
Note
If you used a factory Default Preset or a custom
User Preset as a “make-from” and you want to add
the new Preset to the list of User Presets
contained in your MTX5000 IDU, you must know
the highest user Preset number contained in your
IDU. To add the new Preset to the list of User
Presets, go to step 66.
If you used a custom User Preset as a “make-
from” and you want to use it to replace (overwrite)
an existing custom User Preset, go to step 68.
66. Select the Preset Number text box and enter any
Preset number that is higher than the current highest
Preset in your MTX5000 IDU.
67. Select the Submit option button and observe that the
Preset Number automatically displays the next higher
Preset number available in the Preset User list. Go to
step 69.
68. Select the Preset Number text box, enter the Preset
number that you wish to overwrite, and select the
Submit option button.
69. Observe the new Preset configuration has been
loaded into the MTX5000 IDU and the new Preset
name and Preset number are displayed on the Main
page.
5.5.3 Create or Update Custom Digital ASI Preset
Configuration in Remote Mode
The procedure required to create a new custom digital ASI
Preset configuration or to update an existing Preset configuration
in the Remote mode is contained in the following steps.
When preparing a new digital ASI Preset, you must first select an
existing digital ASI Preset from either the digital ASI factory
default Preset or from your own custom digital ASI Presets. The
selected Preset will be used as a “make-from” to prepare the
new digital ASI Preset configuration.
Please note that while factory default digital ASI Presets may be
used to prepare a new Preset configuration, these factory
default Presets cannot be changed or deleted. They can only
be used as “make-froms”.
When the new configuration is prepared using the factory default
Preset, it cannot be saved with the factory Preset number or