User Manual Part 2

Advanced Operations 5-76MTX5000 User and Technical Manual
Note
In the following step, if a factory default analog
Preset is to be used to prepare a new Preset
configuration, select the Default option.
If a custom user Preset is to be updated or is to be
used to prepare a new Preset, select the User
option.
15. Use the Presets Option pull-down menu and select
Default or User, as required.
16. Use the Color Bars pull-down menu and select Off,
On, Auto Gen, or Auto Standby, as required.
17. Use the PA State Option pull-down menu to select
Off or Last, as required.
18. Select the Submit option button.
19. Select the Main tab and observe the Main page is
displayed.
20. Use the Preset pull-down menu to select the default or
user custom analog Preset required.
21. Select the Setup tab and observe the Setup page is
displayed.
22. Select the FMT tab and observe the FMT page is
displayed.
23. Use the Video Deviation pull-down menu to select 3
MHz or 4 MHz, as required.
24. Use the Video Input pull-down menu to select
Composite or Baseband, as required.
Note
Repeat step 25 thru step 27 for Audio CH1 thru
Audio CH4, as required.
25. Use the Enable pull-down menu to select On or Off,
as required.
26. Use the Pre-Emphasis pull-down menu to select On
or Off, as required.
Note
In the following step, the Frequency pull-down
menus have 11 frequency options and a Custom
option.
If the Custom option is selected, a frequency text
box will be displayed adjacent to the pull-down
menu.
27. Use the Frequency pull-down menu to select the
frequency option required or select Custom.
If Custom is selected, enter the frequency required in
the active text box(es), as required. Frequency range
is 4830 to 8590 kHz.
28. When Audio CH1 thru Audio CH4 options have all
been selected, select the Submit option button.
29. Select the Preset tab and observe the Preset page is
displayed.