User Manual Part 2

Advanced Operations 5-31MTX5000 User and Technical Manual
Notes
If you are updating an existing digital ASI Preset
configuration, select the Preset to be updated in
the following step.
If you are creating a new digital ASI Preset
configuration, any digital ASI Preset may be
selected in the following step.
4. Perform “Select Preset” on page 3-24 to select the
digital ASI Preset required to be updated or to be used
as a “make-from”.
5. Select the Main screen PA operation button for PA
Off, as required.
6. Select the Main screen Setup option button and
observe the Setup screen is displayed. See Figure 5-
68.
Figure 5-68: Setup Screen
7. Select the User option button and observe the
keyboard screen is displayed. See Figure 5-69.
Setup
User
Main
Radio
Figure 5-69: Keyboard Screen
8. Enter your password, select the Enter key, and
observe the Operation Mode screen is displayed.
See Figure 5-70.
Figure 5-70: Operation Mode Screen
9. Select the ASI option button and observe the ASI
screen is displayed. See Figure 5-71 on page 5-32.
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L :
Z X C V B N M < > ?
Shift BS
Clear CancelEnter
“
Operation Mode
Back
COFDM FMT ASI
IP
SCM
LMS-T
Save As Preset
DVBS
MPEG
Main