User Manual Part 2

Advanced Operations 5-72MTX5000 User and Technical Manual
Notes
In the following steps, if a factory default digital IP
Preset was used as a “make-from” to prepare this
custom Preset, the Preset Text text box and the
Save text box must be changed. You cannot
change or overwrite any factory default
Presets!
If a custom digital IP Preset was used as a “make-
from” to prepare this custom Preset, a brief
description of the custom Preset must be entered
in the Preset Text text box for easy identification
purposes.
102. Select the Preset Text option button and observe the
keyboard screen is displayed. See Figure 5-177.
Figure 5-177: Keyboard Screen
103. Enter a unique digital IP Preset description, as
required, and select the Enter key.
104. Observe the Save As Preset screen is displayed and
the Preset Text text box displays the Preset
description.
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L :
Z X C V B N M < > ?
Shift BS
Clear CancelEnter
“
Notes
When saving the new custom digital IP Preset in
the following step, the Preset number will
automatically be increased to the next available
Preset number to avoid overwriting an existing
Preset.
If you wish to overwrite the existing Preset number
(unless it is a factory default Preset), enter the
Preset number to be overwritten. A warning
message will be displayed asking “Are you
sure?”. Select the Yes option button.
Once an existing custom Preset is overwritten, it
cannot be recovered. It must be re-entered from
scratch.
105. Select the Save option button and observe the
numeric keypad is displayed. See Figure 5-178.
Figure 5-178: Numeric Keypad
Notes
When saving Presets in the following steps, Preset
A thru Preset J are factory default Presets. The
factory default Preset numbers cannot be changed.
1 2 3
4
7
5 6
8 9
CLR
0
ESC
ENT
Next Available
Preset Number