User Manual Part 2

Advanced Operations 5-65MTX5000 User and Technical Manual
Figure 5-157: MPEG Screen - Typical
31. Select the Audio In option button and observe the
AUDIO 1 screen is displayed. See Figure 5-158.
Figure 5-158: AUDIO 1 Screen - Typical
32. Use the Mode pull-down menu to select Stereo or
Dual Mono, as required.
33. Use the Standard pull-down menu to select Off,
MPEG Layer II, Linear PCM, or MPEG Layer I, as
required.
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
AUDIO 1
Back
Mode Standard Bit Rate
MPEG Layer II
Input
Dual Mono
192 Kbps
Analog
Audio 2Main
34. Use the Bit Rate pull-down menu to select 128 Kbps,
160 Kbps, 192 Kbps, 224 Kbps, 256 Kbps, 320
Kbps, or 384 Kbps, as required.
35. Use the Input pull-down menu to select Test Tone,
Analog, or SDI Emb, as required.
36. Select the Audio 2 option button and observe the
AUDIO 2 screen is displayed. See Figure 5-159.
Figure 5-159: AUDIO 2 Screen - Typical
37. Use the Mode pull-down menu to select Stereo or
Dual Mono, as required.
38. Use the Standard pull-down menu to select Off,
MPEG Layer II, Linear PCM, or MPEG Layer I, as
required.
39. Use the Bit Rate pull-down menu to select 128 Kbps,
160 Kbps, 192 Kbps, 224 Kbps, 256 Kbps, 320
Kbps, or 384 Kbps, as required.
40. Use the Input pull-down menu to select Test Tone,
Analog, SDI Emb, AES-EBU, or Channel Ide, as
required.
41. Use the Balance pull-down menu to select
Unbalanced or Balanced, as required.
AUDIO 2
Back
Mode Standard Bit Rate
MPEG Layer II
Input
Dual Mono
192 Kbps
Analog
Main
Balance
Unbalanced