User Manual Part 2

Advanced Operations 5-62MTX5000 User and Technical Manual
Figure 5-150: IP Config Screen - Typical
10. Use the FEC pull-down menu to select 1/2. 2/3, 3/4,
5/6, or 7/8, as required
11. Use the Guard Interval pull-down menu and select
1/32, 1/16, 1/4, or 1/8, as required.
12. Use the Constellation pull-down menu to select
QPSK, 16-QAM, or 64-QAM, as required.
13. Use the RF B/W pull-down menu to select 6 MHZ,
7 MHZ, or 8 MHZ, as required.
14. Select the Next option button and observe the IP
Setup screen is displayed. See Figure 5-151.
IP Config
Back
FEC Guard Interval Constellation
1/8
RF B/W
1/2 QPSK
8 MHz
NextMain
Figure 5-151: IP Setup Screen - Typical
Notes
If the IP + Video option is selected in the following
step, go to step 16.
The Video Bitrate option button is active only if the
IP + Video option is selected.
If the IP Only option is selected in the following
step, go to step 20.
15. Use the IP Transfer Mode pull-down menu to select
IP Only or IP + Video, as required, and select the
Submit option button.
16. Observe the Video Bitrate option button is active.
17. Select the Video Bitrate option button and observe
the numeric keypad is displayed. See Figure 5-152 on
page 5-63.
IP Setup
Submit
IP Transfer Mode
Max Bit Rate 19.350 Mbps
12.902 Mbps
IP + Video
Main
Video Bitrate
IP Rate
5.2 Mbps
Back