User Manual Part 2

Advanced Operations 5-61MTX5000 User and Technical Manual
Notes
If you are updating an existing digital IP Preset
configuration, select the Preset to be updated in
the following step.
If you are creating a new digital IP Preset
configuration, any digital IP Preset may be
selected in the following step.
4. Perform “Select Preset” on page 3-24 to select the
digital IP Preset required to be updated or to be used
as a “make-from”.
5. Select the Main screen PA operation button for PA
Off, as required.
6. Select the Main screen Setup option button and
observe the Setup screen is displayed. See Figure 5-
147.
Figure 5-147: Setup Screen
7. Select the User option button and observe the
keyboard screen is displayed. See Figure 5-148.
Setup
User
Main
Radio
Figure 5-148: Keyboard Screen
8. Enter your password, select the Enter key, and
observe the Operation Mode screen is displayed.
See Figure 5-149.
Figure 5-149: Operation Mode Screen
9. Select the IP option button and observe the IP Config
screen is displayed. See Figure 5-150 on page 5-62.
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L :
Z X C V B N M < > ?
Shift BS
Clear CancelEnter
“
Operation Mode
Back
COFDM FMT ASI
IP
SCM
LMS-T
Save As Preset
DVBS
MPEG
Main