User Manual Part 2

Advanced Operations 5-53MTX5000 User and Technical Manual
44. Select the Mode pull-down menu and select Standard
or Low delay, as required.
45. Select the Bit Rate pull-down menu and select
MP@ML or 422P@ML, as required.
Notes
In the following step, if the Bit Rate Auto option
button option selected is On, the Bit Rate option
button will be inactive (greyed out). Go to step 47.
If the Bit Rate Auto option button option selected
is Off, the Bit Rate option button will be active. Go
to step 46.
46. Select the Bit Rate Auto option button for Off or On,
as required.
47. Observe the Bit Rate option button is active. Select
the Bit Rate option button and observe the numeric
keypad is displayed. See Figure 5-127.
Figure 5-127: Numeric Keypad
48. Enter the bit rate required, select the ENT key, and
observe the Encoder screen is displayed.
1 2 3
ESC
0
4
7
5 6
8 9
DEL
0
ESC
ENT
49. Select the GOP Length option button and observe the
numeric keypad is displayed. See Figure 5-128.
Figure 5-128: Numeric Keypad
50. Enter the Group of Pictures (GOP) number required,
select the ENT key, and observe the Encoder screen
is displayed.
51. Select the Encoder 2 option button and observe the
Encoder screen is displayed. See Figure 5-129.
Figure 5-129: Encoder Screen 2 - Typical
1 2 3
4
7
5 6
8 9
CLR
0
ESC
ENT
Encoder
Back
Horiz Resolution Aspect Ratio
720
PID
Off
4:3
PTS per Picture VBI Off
Main
Remux Off