User Manual Part 2

Advanced Operations 5-46MTX5000 User and Technical Manual
Notes
When saving the new custom digital LMS-T Preset
in the following step, the Preset number will
automatically be increased to the next available
Preset number to avoid overwriting an existing
Preset.
If you wish to overwrite the existing Preset number
(unless it is a factory default Preset), enter the
Preset number to be overwritten. A warning
message will be displayed asking “Are you
sure?”. Select the Yes option button.
Once an existing custom Preset is overwritten, it
cannot be recovered. It must be re-entered from
scratch.
97. Select the Save option button and observe the
numeric keypad is displayed. See Figure 5-108.
Figure 5-108: Numeric Keypad
1 2 3
4
7
5 6
8 9
CLR
0
ESC
ENT
Next Available
Preset Number
Notes
When saving Presets in the following steps, Preset
A thru Preset J are factory default Presets. The
factory default Preset numbers cannot be changed.
Notes
To change the default Preset number, perform step
98 and go to step 99.
To accept the next available Preset number, go to
step 99.
98. Select the CLR key and enter the Preset number
required.
99. Select the ENT key and observe the Are you sure?
confirmation screen is displayed. See Figure 5-109.
Figure 5-109: Confirmation Screen
100. Select the YES option button and observe the Please
Wait! message box is displayed. See Figure 5-110 on
page 5-47.
No
Are you sure?
Yes