User Manual Part 2

Analog Color Bar Generator B-14MTX5000 User and Technical Manual
Figure B-19: Color Bars Screen
4. The video display should display color bars similar to
Figure B-20. The text lines should be displayed where
you intended, and should contain the characters you
entered.
Figure B-20: Color Bar Generator Default Screen
Check Auto Generate
1. Select the MTX5000 IDU color LCD display panel
A Gen option using the touch screen or the function
keys. See Figure B-21.
Color Bars
A GenOnOff A Stby
Back
Main
Text Line A
(16 Characters
Maximum)
Text Line B
(16 Characters
Maximum)
MRC - BOSTON
REMOTE 1
Figure B-21: Color Bars Screen
2. Apply a video input to the MTX5000 IDU. If A Gen is
correctly configured, the color bars and text lines
should disappear from the video display.
3. Disconnect the video input while watching the video
monitor. After the A Gen delay you configured, the
bars and text should appear.
Check Auto Standby
1. Connect external antennas or RF dummy loads to the
MTX5000 IDU RFU 1 and RFU 2 output connectors.
Note
When performing the following steps at the
MTX5000 IDU color LCD display panel, option
buttons may be selected using either the touch
screen or the function keys and the SEL key.
2. Select the MTX5000 IDU color LCD display panel
Color Bars screen A Stby option button. See
Figure B-22 on page B-15.
Color Bars
A GenOnOff A Stby
Back
Main