User Manual Part 2

Advanced Operations 5-39MTX5000 User and Technical Manual
28. Use the Bit Rate pull-down menu to select 128 Kbps,
160 Kbps, 192 Kbps, 224 Kbps, 256 Kbps, 320
Kbps, or 384 Kbps, as required.
29. Use the Input pull-down menu to select Test Tone,
Analog, or SDI Emb, as required.
30. Select the Audio 2 option button and observe the
AUDIO 2 screen is displayed. See Figure 5-89.
Figure 5-89: AUDIO 2 Screen - Typical
31. Use the Mode pull-down menu to select Stereo or
Dual Mono, as required.
32. Use the Standard pull-down menu to select Off,
MPEG Layer II, Linear PCM, or MPEG Layer I, as
required.
33. Use the Bit Rate pull-down menu to select 128 Kbps,
160 Kbps, 192 Kbps, 224 Kbps, 256 Kbps, 320
Kbps, or 384 Kbps, as required.
34. Use the Input pull-down menu to select Test Tone,
Analog, SDI Emb, AES-EBU, or Channel Ide, as
required.
35. Select the Back option button and observe the AUDIO
1 screen is displayed.
AUDIO 2
Back
Mode Standard Bit Rate
MPEG Layer II
Input
Dual Mono
192 Kbps
Analog
Main
Balance
Unbalanced
36. Select the Back option button and observe the MPEG
screen is displayed. See Figure 5-90.
Figure 5-90: MPEG Screen - Typical
37. Select the Spectrum Invert option button to select
Normal or Inverted, as required.
38. Select the Encoder option button and observe the
Encoder screen is displayed. See Figure 5-91.
Figure 5-91: Encoder Screen - Typical
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
Encoder
Back
Mode Bit Rate
Low delay
4.9 Mb/s
Bit Rate
On
MP@ML
Encoder 2
Bit Rate Auto GOP Length 15
Main
ASI Bit Rate
5.529
Mb/s