User Manual Part 2

Installation 6-8MTX5000 User and Technical Manual
Table 6-1: Functions and Cables Required
Function
Cable Description
(Vendor Part Number)
Outside Diameter
Inches [mm]
IF + DC Power to ODU
IF signal + DC Power + ODU Control TRIAX
(Belden 8232)
.315
[8.0 mm]
Antenna Functions
Antenna Polarization Control - Single Band Operation 6 Conductor 20 AWG stranded
(Manhattan M33406)
.255
[6.47 mm]
Antenna Polarization Control - Dual Band Operation 10 Conductor 20 AWG stranded
(Manhattan M33410)
.335
[8.5 mm]
Existing Wiring
IF Signal + ODU Control Coaxial, Type N Connectors
(RG-214)
.425
[10.79 mm]
2A20 POL CTL/PA200/PA700 5 Conductor 20 AWG Stranded
(Belden 9445)
.239
[6.07 mm]
Standard ODU
Type N and TNC Connectors
9 Conductor 20 AWG Stranded
(Belden 9455)
.317
[8.05 mm]
High Power ODU
Type N Connector
7 Conductor 16 AWG Stranded
(Belden 8621)
(Recommended for both Standard and
High Power ODU installations)
.458
[11.63 mm]
Nycoil Conduit
Nycoil Conduit
(Nycoil 19081)
1”
[25.4 mm]
Nycoil Conduit
(Nycoil 20001)
1.25”
[37.5 mm]