User Manual Part 1

Routine Operation 3-56MTX5000 User and Technical Manual
3.6.17 Perform IDU Diagnostics
The procedure required to perform IDU diagnostics are
contained in the following steps.
Note
In the following procedure, option buttons may be
selected using either the touch screen or the
function keys and the SEL key.
1. Observe the Main screen is displayed. See Figure 3-
116.
Figure 3-116: Main Screen - Typical
2. Select the Setup option button and observe the Setup
screen is displayed. See Figure 3-117.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
Setup Option
Button
Figure 3-117: Setup Screen
3. Select the Radio option button and observe the Radio
screen is displayed. See Figure 3-118.
Figure 3-118: Radio Screen
4. Select the Diagnostics option button and observe the
Diagnostics screen is displayed. See Figure 3-119
on page 3-57.
Setup
User
Main
Radio
Radio
Back
Network Config Level Adjust Color Bars
Calibration
Time & Date
Change Pwd
System Info
License Key
Diagnostics
Next
Main