User Manual Part 1

Routine Operation 3-47MTX5000 User and Technical Manual
Figure 3-92: RECONFIGURING RADIO Screen - Typical
4. After a short delay, observe the RF Band screen is
displayed, select the Main option button, and observe
the RF band setting required is displayed. See
Figure 3-93.
Figure 3-93: Main Screen - Typical
5. Select the Setup option button and observe the Setup
screen is displayed. See Figure 3-94.
60 %
RECONFIGURING RADIO. PLEASE WAIT!
DO NOT POWER OFF RADIO UNTIL RECONFIGURED!
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 V
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status -> PA On
SUM
ODU
IDU
RF
L/R
H
L
RF Band
Setting
Figure 3-94: Setup Screen
6. Select the Radio option button and observe the Radio
screen is displayed. See Figure 3-95.
Figure 3-95: Radio Screen
7. Select the Calibration option button and observe the
PA Voltage Adjust Setup screen is displayed. See
Figure 3-96 on page 3-48.
Setup
User
Main
Radio
Radio
Back
Network Config Level Adjust Color Bars
Calibration
Time & Date
Change Pwd
System Info
License Key
Diagnostics
NextMain